We join Trevor Palmer, the inventor of a revolutionary universal mounting system for mounting EV chargers, to learn more about the inspiration behind EV blocks. With nearly 500 charging points under their belts, the team at PB Solutions – electrical contracting company Trevor – faced multiple challenges while installing base-mounted EV charging points. “Not only is the installation of commercial electrical charging points high cost and time consuming to install, but our customers often have major disruptions during the installation process; the holes have to be drilled, cement mixed, poured and left to dry, and the terminals finally installed. Other problems occurred,” he recalls. Due to changing arrangements from one Charger model to another. ”It was her learning from frustrating on-site experiences that inspired Trevor to create EV Blocks. Designed to provide a simple solution for ongoing installation and maintenance, EV Blocks support EV Chargers installed on the base of many different manufacturers. The use of the (patent pending) universal converter board for blocks, the installation of electric vehicle charging stations and the upgrade or servicing of charging points has become much simpler because: a) the general panel technology allows projects to start before the chargers are defined or even specified – the meaning blocks can be fitted to the fittings Future scrutiny at the civil works stage. B) Installation ensures uniform finish every time. C) The blocks can be installed in any weather conditions, which increases efficiency and productivity. D) Standardized size and finish can be used with 50, 100 and 150mm cable channels and allows changing orientation on each block, if required. The blocks can also be used for cable pulling access. E) EV blocks make changing charging stations simpler – just replace the transformer board and change the charger without having to re-work the foundations. F) The blocks are suitable for local grounding with a grounding rod inside the block, or with an open PEN. Electric vehicle blocks are made in Britain and are 100% recyclable. Four reasons for choosing electric vehicle blocks 1. Comprehensive panel technology The general installation allows projects to begin prior to project identification or selection. The blocks can also be installed for future insulating installations at the civil works stage. 2. Save time and reduce the carbon footprint on every install. The innovative design can be used with channels up to 150 mm and allows changing direction on each block, if required. 3. Commercial Installation Consistency This engineering solution ensures a uniform finish for every installation. Blocks can be installed in any weather conditions, which increases efficiency and productivity. 4. Super strong uniform platform suitable for local grounding with ground rod inside the block, or with open PEN device. Watch a supporting video of EV Blocks in action by clicking here
0 Comments